Towel embroidery

Towel embroidery

Towel embroidery, characterized by its strong three-dimensional sense, rich hierarchy and gorgeous colors, has a broad development prospect in the fields of children's clothing, home decoration and women's shoes and hats.

The functions and features of this series of machines

1. Large color LCD with high resolution and dynamic digital tracking display pattern

2, can read and write Tajima, Balinda, ZSK, binary, ternary system file format, storage capacity of up to 1 million stitches, 99 patterns.

3. With the functions of rotating, scaling, editing and repeatedly embroidering;

Stitch compensation function and complementary embroidery function.

4. It has the function of power off protection, power off recovery and disconnect detection.

5. Specific functions of automatic color changing, foot lifting and automatic line cutting (optional).

6, feedback control function: the introduction of feedback control function, so that the needle and swing shuttle action more accurate control, and get a more stable embroidery effect.

7. Automatic standby function: When embroidery is completed, the needle and foot bar will rise to 27mm automatically, which is convenient for frame changing.

8. Function of automatically changing embroidery mode: the Settings of towel embroidery and chain embroidery can be changed with the operation panel, and the Settings can also be selected automatically and manually (up to 99 times can be set).

9. Automatic needle height adjustment function: According to the pattern and fabric thickness, the needle height can be adjusted automatically or manually (level 10) to obtain the most suitable embroidery tension and the best embroidery effect.

10. High speed and low noise design: the high speed operation of the chain head of 600rpm and the embroidery head of 850rpm is realized. The embroidery speed is automatically controlled according to the characteristics of the stitch in the embroidery process.

11. Plain coated stitch compensation: the stitch length of plain coated wire can be increased or decreased according to needs.

The main configuration in this series：

1. Basic configuration of BECS-219 computers, and according to user requirements can be selected becs-C18 /C88 and other high-end specifications of the computer;

2. Spindle motor: it can be equipped with servo drive, frequency conversion drive, etc., according to user requirements;

3. Embroidered frame drive: full servo drive or step drive is optional;

4. Original imported spinning shuttle from Japan, original Italian Megadyne belt;

5. New linear drive guide;

6. Automatic wire cutting device (optional)