Views: 5 Author: Site Editor Publish Time: 2020-08-03 Origin: Site
Introduction of flat embroidery
Plain embroidery series computer embroidery machine products, widely used in fashion, curtains, bedspreads, toys, decorations, arts and crafts and other embroidery technology.
This series of products has nine main functions and features：
1. Liquid crystal display: it adopts large color LCD with high resolution. The pattern can be dynamically tracked in the embroidery process, and the Chinese and English can be switched according to the needs, which is simple and convenient to operate.
2. Pattern format and storage capacity: Can read and write tajima, Balinda, ZSK, binary, ternary disk format files, storage capacity up to 1 million pins, 99 patterns.
3. Rotation and scaling of the pattern: The pattern can rotate arbitrarily within 0-360 degree circle, or can be reversed left and right.
The pattern can be scaled at will between 50-200%, still can choose the rotation of the pattern first or enlarge first, in order to meet the embroidery of different needs.
4, pattern editing and combination function: the pattern in memory can be edited and modified, but also a number of different patterns, different directions, multiple, distance combined into a new pattern, flexible and convenient to use.
5. Function of repeated embroidery: It can be repeatedly or partially repeatedly, with a maximum of 9 horizontal times and 9 vertical times, for a total of 81 times.
6. Stitch compensation function: The specified pattern can be automatically searched for plain wrapped needles, and the width of the specified pattern can be expanded as required to generate new patterns.
7, complementary embroidery function: in embroidery, due to broken thread and other reasons, some machine head will miss embroidery, then you can go back to the point of missing embroidery, the number of stitches will be unlimited in embroidering common patterns, in embroidering combined patterns, you can go back to the starting point of current common patterns.
8. Automatic compensation function: According to different requirements of fabric pattern, the machine can set compensation for X axis and Y axis separately or simultaneously to achieve the best embroidery effect.
9. It has the functions of power off protection and power off recovery, line break detection and automatic line cutting (optional).
The main configuration of this series of products :
1. Basic configuration of BECS-322 three-phase (no wire cutting)/Becs-328 (automatic wire cutting machine), and becs-C18 /C88/216/266/316/366/ and other high-end computers can be selected according to user requirements.
2. Spindle motor: it can be equipped with servo drive, frequency conversion drive, etc., according to user requirements.
3. Embroidered frame drive: full servo drive or step drive is optional.
4. Original imported spinning shuttle from Japan, original Italian Megadyne belt.
5. New linear drive guide.
6. Automatic wire cutting device (optional).
7. Number of stitches: 4/6/9/12/15 stitches. Number of heads: 1~50. Embroidery range: X direction: 150-1100mm, Y direction: 300-1500mm.